According to the Circular, QCVN 100:2024/BTTTT provides for EMC requirements for private land mobile radio using digital technologies and similar technologies; terrestrial trunked radio and other auxiliary equipment.
Technical targets concerning antenna ports and radiation from the port of private land mobile radio and terrestrial trunked radio that are not prescribed in QCVN 100:2024/BTTTT but will be prescribed in Regulations on corresponding products for effective use of the radio frequency spectrum.
QCVN 100:2024/BTTTT provides for test conditions, quality assessment criteria, and quality criteria for EMC applicable to private land mobile radio, terrestrial trunked radio, and auxiliary equipment.
Examples of private land mobile radio and terrestrial trunked radio are listed in Appendix A. HS codes of equipment under QCVN 100:2024/BTTTT are prescribed in Appendix B.
Where there are differences (i.e., special conditions, definitions, or abbreviated words) between QCVN 100:2024/BTTTT and QCVN 18:2022/BTTTT, comply with QCVN 100:2024/BTTTT.
Regulations on the environment and requirements for radiation and immunity in QCVN 100:2024/BTTTT are cited according to QCVN 18:2022/BTTTT, excluding other separate conditions prescribed in QCVN 100:2024/BTTTT.
Responsibilities of organizations and individuals for private land mobile radio and terrestrial trunked radio in Vietnam
- Relevant radio equipment under the scope of Article 1.1 shall comply with this Regulation.
- The declaration of conformity for equipment under the scope of this Regulation and the methods of assessing the declaration of conformity shall comply with current regulations.
- Regarding methods of assessing the declaration of conformity
Comply with one of the three methods prescribed in Circular No. 28/2012/TT-BKHCN and amendments and replacements of Circular No. 28/2012/TT-BKHCN as follows:
+ Method 1: Testing typical samples.
+ Method 5: Testing typical samples and assessing the manufacturing process; carrying out supervision through testing of samples collected from manufacturing areas or the market in association with assessments of the manufacturing process;
+ Method 7: Testing and assessing batches of products and goods.
See more details in Circular No. 13/2024/TT-BTTTT , effective as of January 1, 2025.
>> CLICK HERE TO READ THIS ARTICLE IN VIETNAMESE
Above are the summary and notification of new documents for customers of THU VIEN PHAP LUAT. For more information, please send an email to [email protected].
17